How To Install Sakrete Paver Frame

DIY with WI

We're here to help you take the hard out of hardscaping.

Subscribe

Overview

• Difficulty: Easy
• Est. time: 1–two hours

Materials

• x" landscape spikes
• Plastic edge restraint

Tools

• Piece of work gloves
• Small sledgehammer
• trowel
• Snap-border cutters, side-cut wire cutters, saw or knife

Restraint is an essential part of every hardscape project. Y'all restrain a retaining wall with backfill. You restrain a burn down pit with concrete adhesive. You restrain a paver patio or walkway with edge restraint.

While in that location are several methods to restrain hardscaping, in this tutorial nosotros'll walk yous through four like shooting fish in a barrel-to-understand steps on how to reinforce your paver project. Let's become started.

1. Pull away sand from your pavers

One time you've laid all your paving stones on a solid base, information technology'south time to beginning installing your edge restraint. The first affair you'll want to do is use a concrete trowel to scrape or pull the sand abroad from your pavers. The reason this is of import is that you lot demand to prepare a infinite for your edge restraint.

We all know that information technology'southward easier to build a sandcastle with wet sand. The same concept applies here. Information technology'south much easier to scrape abroad a clean space for your restraint when the sand is wet. Proceed a watering tin or hose handy to spray your sand before you lot start scraping. Be conscientious not to over-moisture the sand considering it can really brainstorm to wash the sand out from under the pavers.

2. Install edge restraint

At present that you've prepared your paver edges, it'due south time to install the edge restraint. In this example, we installed a square paver patio, so at that place were no modifications we needed to make before installing. Nonetheless, if you're installing a circle patio, you lot'll demand the edge restraint to flex to fit the circle blueprint. Cut the thin dorsum web on the outer side of your restraint, using a snap-edge cutter, side-cutting wire cutters, saw or knife, subsequently every third hole like you meet below.

Side by side, gear up the restraint firmly against your pavers.

3. Identify spikes

Now, you lot'll want to install ten" non-galvanized landscape spikes in every third hole (about every human foot in length). If your pavers are for vehicular traffic, we'd recommend placing a spike every second pigsty (about every 8"). Concord the fasten as directly equally possible while property the restraint in place with your foot.

4. Cover edge restraint

Once you've placed spikes for your specific application, whether pedestrian or vehicular, cover the restraint using whatsoever extra sand, gravel, or dirt that'southward lying effectually.

The reason y'all want to cover your edge restraint is that it'due south thermoplastic-based, and the heat from the sun can warp the product, resulting in a less restrained projection. By covering it upward, you lot'll ensure that your edge restraint secures your pavers equally intended.

Become an calm hardscape expert

Here at Western Interlock, we're on a mission to take the hard out of hardscaping. That's why we publish DIY tips, tricks, and pace-past-step tutorials at DIYwithWI.com and host a live DIY seminar every month during the summer at one of our manufacturing or distribution facilities.
If you accept whatever questions, you tin can visit our Paving Rock Display at our Manufacturing Facility in Rickreall, OR. Alternatively, give us a call our team of hardscape experts at 503-623-9084.

Source: https://westerninterlock.com/how-to-install-hardscape-edge-restraint/

Posted by: seaythoomed.blogspot.com

Share this post